Rapala World Record 468x60
Share :
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Trolling
#1
Yes stolen from Bloody Decks, I know Erik well. He and Berkley/Abu Garcia's Captain Jimmy Decker did a get article.

TROLLING FOR DUMMIES, PART 2

[Image: Decker_5.jpg]In last week's column, Trolling for Dummies, I covered the basics of choosing, rigging and positioning trolling lures in your spread. For part two of the series, I met up with Capt. Jimmy Decker, a professional guide and expert offshore angler, and asked him to explain the tackle and techniques that he uses when trolling from a private boat.

Whether trolling from a client's yacht or on his 24-foot Everglades center console, Decker likes to keep his tackle simple. His trolling gear is made up of four Penn International VS12 two-speed reels full of 30-pound high-vis yellow monofilament and mounted on 7-foot Penn International or Bluewater Carnage rods rated for 20- to 50-pound line.

Quote:“I've never hooked anything trolling in Southern California that I couldn't land on 30-pound line, so I don't see any reason to fish with anything heavier,” he says. “Sure it might take me an hour to land a 150-plus-pound striped marlin, but it's definitely a fun way to spend an hour.”
[Image: erik-so-cal.png]In tournaments, Decker will troll with even lighter line. “A few years ago, I was competing in a light-line tournament and caught a 52-pound yellowfin tuna on 12-pound line. Trust me, once you spend a few days trolling with 12-pound, 30 starts to feel like rope,” he says.

Decker rigs his 30-pound “rope” with a 12-foot wind-on leader of 80-pound monofilament with a snap swivel on the end to attach the lure, which has its own 3-foot-long leader. “Having a heavy wind-on leader is key when you're fishing with light line as it gives you the ability to handle the fish at boat side without worrying about breaking it off,” he says.

Decker's lure choices depend on what species he's targeting. “If I'm paddy fishing or looking for tuna, I'll normally run a couple of tuna feathers on flat lines two or three waves behind the boat and I'll run a couple of marlin jigs in the outriggers four waves back. If I'm marlin fishing, I'll just replace the tuna feathers with marlin jigs.”

[Image: Decker_3.jpg]Decker's go-to marlin jig is the Seven Strand 1220, a 12-inch lure with an angled head that is no longer in production.

“I fish the 1220 because I have confidence in it, but any good swimming head jig will work,” he says.

Decker also fishes with colors he knows work. “I always run the same colors — pink, black-and-purple, mackerel and Mean Joe Green. The fish will usually bite one of them.”

With the jigs chosen and the rods rigged, it's time to go fishing, but make sure to do your homework first. “The night before any offshore trip, I'll check the SST (sea-surface temperature) shot on www.fishdope.com, looking for temperature breaks in the area that I plan to fish. A sharp temp break normally means there is a current break in the area and those current breaks tend to have paddies and bait on them.”

Once he arrives in the area that he intends to fish, the first thing Decker does is slow down and look for signs of life.

[Image: Decker_4.jpg]“I look for birds, bait, porpoises, whales or anything that indicates that there might be activity in the area. If I pull up and find zero signs of life, I won't even bother putting out the trolling rods," Decker says. "Some guys like to troll around while they look for the right conditions, but I don't do it because it takes way too long to cover any distance when you're running at 7 knots. It's better to run fast until you find a fishy looking area and then start trolling.”

Regarding trolling direction, Decker had this to offer: “When fishing a current break or some other open-water area, it doesn't seem to matter which direction you troll, so I'll normally just troll downhill for the sake of comfort. The only time I'll troll in a certain direction is when the sun is very low on the horizon and then I'll troll into the sun as it seems to produce more bites.”

[Image: Decker_2.jpg]Decker trolls at 7 knots but warns that not all boats troll the same. “You need to find the right speed for your own boat and you can use your lures to determine that speed. A swimming marlin jig trolled four waves behind the stern should be popping every five to eight seconds. So start at 7 knots and play around with your speed slightly until you find the right balance. For example, the perfect speed on my boat is 7.2 knots in calm water.”

Then there is the issue of lure placement. “The biggest mistake that I see guys making is that they put their lures too far back and run the boat too fast when trolling from a small boat. On the big yachts and sport boats you need to troll further back to get the lures running at the back end of the prop wash, but the back end of the prop wash is a lot closer on a small boat,” Decker says.

When trolling around high spots, Decker follows a specific strategy. “If I'm fishing a spot like the 14 Mile Bank, I like to troll across the high spot from several directions and then work the areas around the bank. For example, I'll troll across it from northwest to southeast and then once I'm a half-mile or so past it, I'll make a loop and run across it again from south to north. Then repeat the process from northeast to southwest and so on until I've covered the entire bank and the waters around it,” he says. “If I get bit running a particular direction, I'll normally make another pass in the same direction to see if I can get another bite.”

If you'd like to spend a day learning directly from the master, you can contact Decker through his website at www.fishingwithdecker.com.

Part 1



AUTHOR: ERIK LANDESFEIND August 30, 2012



[Image: check-big.png]32 [Image: check-big.png]1



TROLLING FOR DUMMIES

In last week's So Cal Scene, I touched upon the subject of trolling while discussing fishing kelp paddies. Apparently I should've spent a little more time on the subject as I've received several emails from readers with questions like, “What colors and brands of lures should I use?” “How exactly should I set up my trolling spread?” and “How do I go about trolling that spread?”
My honest answer to most of them was, “I don't know, but I'm going to find out.”
[Image: erik-so-cal.png]So, over the weekend I met up with a couple of local pros and asked them to explain the tackle and techniques they use and in terms that a trolling neophyte like myself could understand.
My first stop was to visit my friend Danny Mun at Melton Tackle in Anaheim, California. He started pulling lure after lure out of the massive showcase and described them using strange terms that I assume are only intelligible to those well versed in marlin speak. I was flattered that he'd assumed I'd understand the lingo, but requested that he dumb it down a bit.
For anglers trolling [b]Southern California waters, there are really only two lure sizes that you need to cover most of the bases. Certain instances call for specific lures outside of those parameters, but two sizes will usually get the job done. First are the small lures, which are usually five to seven inches long and are used when targeting school-sized tuna, dorado and yellowtail. These sizes come with various head shapes, but the tried-and-true bullet-head and jet-head designs tend to work best for a range of species. These lures run straight and can be effectively fished at a variety of distances behind the boat.
[Image: Jets.jpg]
Then come the big lures, which vary in size from 10 to 12 inches or larger. These lures are mainly used for targeting marlin, but will also work for dorado and larger tuna. These come in several different head styles. Bullet and jet heads run the same as the smaller ones, while plunger and angled heads will run with an erratic swimming action on the surface that leaves a bubble trail while intermittently splashing on the surface.
[Image: Big_Lures.jpg]Choose your lure color depending on lighting conditions and other factors such as what bait the fish are feeding on. It's good to carry a variety of colors. Danny told me that he chose the lures for the photographs based on what his customers have been using to catch fish, so similar colors should work for you. He also mentioned that the dorado have been biting the bigger marlin lures lately, especially the [url=http://www.meltontackle.com/products/black-bart-rum-cay-candy.html]Black Bart Rum Cay Candy, and [b]pink has definitely been a hot color in Southern California.
[b]Rigging Lures
Smaller lures are fairly easy to rig and you'll only need minimal supplies to do it. It's always better to crimp trolling hooks than to tie knots, but you can get away with knots on smaller lures if you need to. When rigging smaller lures, Danny recommended using a single or double hook that is appropriate to the size of the lure and use enough beads in between the hook and the lure so the barb of the hook sits just above the bottom of the skirt when it's rigged.
[Image: Bead_rig.jpg]
Rigging bigger lures takes a lot more time to explain than I have in this column, but luckily Ali Hussainy has already covered the basics in the article [url=http://www.bdoutdoors.com/article/how-to-rig-marlin-lures/]How to Rig Marlin Lures.
[b]Setting the Spread
Once you've got your lures rigged, it's time to set up the trolling spread. The size and look of your trolling spread depends on your boat. If you've got a large boat with outriggers and an experienced crew, you can easily troll a five- to seven-lure spread, but if you have a smaller boat you're much better off using a three- to four-lure spread.
Danny cautioned that regardless of boat size, anglers should start out trolling three rods and only work up to five once they're comfortable fishing three. With five rods out, the margin for error goes way down.
Below are a couple of illustrations of the different trolling patterns. As you can see, the lures are staggered and their distance from the boat is indicated by how many waves in the wake they are behind the boat's transom. These are only suggested distances. The optimal trolling distance varies from boat to boat, so you'll need to figure that out on your own.
[Image: Lure_Patterns.jpg]
Lure placement in the spread is equally important as the lures you choose to fish with. Some lures are more effective in certain positions. Below is an example of a three-lure spread that would work well for dorado with a shot at a marlin. It has two jet heads running tight to the boat and a Rum Cay Candy in the center position. To fish tuna, you could leave the jet heads in the spread or switch them out with some feathers and change the long lure to a cedar plug.
[Image: 3_spread.jpg]These are just the trolling basics but they'll help you out when it comes time to drag some jigs. Next week, I'll be talking with offshore specialist Jimmy Decker about the tackle and techniques that he uses to target California's striped marlin and other offshore species.











[url=http://www.bdoutdoors.com/article/disabled-hunting-never-give-up/]Next Article: Never Give Up >>



Reply
#2
Nice steal it and post it haha
great report
Let God lead the way!
Give a man a fish he eats for one day, teach him to fish he eats forever!
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)
advt

hotboat.com